In the past, we have produced for researchers 150mm lengths of high purity aluminium
oxide ( Alumina ) and magnesium oxide of various diameters. Because they were
made by vacuum extrusion, machining them was an art. Their density was lower
than that achievable by other processes.
We can now produce a range of oxides of much higher density which are considerably
easier to machine, with wall thickness down to 0.3mm.
The round pre-forms at present available are 10mm in diameter and 20mm long,
when held in a simple plastic collet, Alumina; stabilised Zirconia and magnesium
oxide can be drilled and turned with ease
Ceramic Substrates and Components Ltd - Lukely Works, Carisbrooke Road, Newport, Isle of Wight, United Kingdom. PO30
1DH - Company Registration No.934853 Copyright ©
Ceramic Substrates & Components Ltd - all copyrights
and other intellectual property rights of this web site are reserved. Any copying
of the design or contents or other unauthorised use will infringe the rights
of Ceramic Substrates & Components Ltd under international treaty and English
law.
Website usage terms and conditions | Sitemap
