Machinable Ceramics
A comprehensive range of materials for rapid prototyping which can be achieved by normal machining techniques using Tungsten Carbide Tools.
Macor®
- (machinable glass ceramic) has a continuous use temperature of 800°C
and a peak temperature of 1000°C. Its coefficient of thermal expansion
readily matches most metals and sealing glasses. It is non-wetting, exhibits
zero porosity >> Macor®
Pyrophyllite
(Aluminium Silicate) - Ceramit 10/14 is a machinable mineral which assumes
many of the properties of fired Ceramics. Iideal for prototypes, experimental
and pilot scale productions >> Pyrophyllite
Graphite
- We can supply graphite in round or square rods, plates or machined components
for use in heaters, element supports and for the glass making industry >>
Graphite
Shapal
M/BNP-2 - BNP-2 Machinable Aluminium Nitride is offered as a direct
alternative to Shapal M >> Shapal
M/BNP-2
BNP-2
- is best described as a Machinable Aluminium Nitride. It compares very
favourably with other manufacturers versions >> BNP-2
Shapal
- a machinable form of Aluminium Nitride ceramic with excellent mechanical
strength and thermal conductivity >> Shapal
High
Temp Machinable Alumina - this material is very strong at high temperature,
with good resistance to thermal shock >> High
Temp Machinable Alumina
Pure
Oxides - we produce a range of oxides of much higher density which are
considerably easier to machine, with wall thickness down to 0.3mm >>
Pure Oxides
Boron
Nitride - is a synthetic technical ceramic material, which is available
in powder, solid, aerosol and liquid forms >> Boron
Nitride
Duratec - is a high-density versatile engineering material in Calcium silicate >> Duratec
Images
- examples of some of the finely machined ceramics we can produce >>
Ceramic images
