Standard & Stock Ceramic Products

Applications

Fig 1	Fig 2

Fig1

• Large Insulator top right 300mm high, 175mm dia. 13mm wall thickness. - application special purpose muffle 1100°C.
• Bottom right - former for embedding electrical resistance spiral - 90mm dia. 75mm high.
• Top left - Camera demist heater former - high altitude photography.
• Centre left - flanged tube R.F. Zone hardening jig.

Fig 2

• Top right - Transmitter HF. Power choke former 125mm X 30mm dia.
• Third row down top left hand side - Toothed insulated clutch component 15 KV.
• Bottom Centre - Semi-conductor brazing fixture and R.F. Silver soldering 'Holding finger'.

Fig 3.	Fig 4.

Fig 3.

Max. size top row 40mm dia. - bottom row 8mm dia. Applications range from Laser support "V" blocks to transducer cores, high mechanical stability over wide temperature range. Plug gauges, etc.

Fig 4.

• Centre piece - 125mm dia 12mm thick Gasket for high vacuum applications demanding insulation between sections. 
• Electron microscope insulators. 
• Threaded male and female insulating bolts.

Section Navigation

Stock Ceramic Products

• Introduction
• Piston Cylinder Assemblies
• Octahedra
• Feed Through Bushes
• Egg Insulators
• Stand Off Insulators
• Fish Spine Beads
• Knuckle Beads
• Machinable Oxides
• Cartridge Heaters
• Thermal Expansion Data
• Physical Properties
• Physical Properties Alumina
• Applications

Copyright © Ceramic Substrates & Components Ltd - all copyrights and other intellectual property rights of this web site are reserved. Any copying of the design or contents or other unauthorised use will infringe the rights of Ceramic Substrates & Components Ltd under international treaty and English law.
Website usage terms and conditions | Sitemap | Cookie Compliance